Patch Cables
Rugged stage grade directional pedal boards cables.
Most pedalboards have over a meter of extra cable running through your board, make sure it’s the best.
Patch cables are all the same right? We’d argue not… We’re firm believers that our diction floating shield method of wiring cables should be the way it should be done anyway. In our testing and research, we’ve found our cables to be the least noisy/hummy than other well celebrated of its peers.
CHose your PATCH
Patch Cable
18cm - Small
Perfect for connecting two pedals with jack points next to each other.
Price £20
Patch Cable
22cm - Medium
When you need to do the up and over! Ideal when a when you have to go from a side to top mounted jack point.
Price £22
Patch Cable
33cm - Large
Ideal for jump back to your tuner from a pedal board interface or using an FX loop.
Price £26
Patch Cable
64cm - X-Large
You’ve stacked four/five pedals top and bottom and need to find you signal path from bellow to the top!
Price £29
Signal chain flowing towards the amp/desk is marked ‘AMP’ and its green
Outputs from another pedal is mark ‘Guitar’ and coloured yellow
Cable specification
All our cables are hand wired in the United Kingdom. Every cable is put through rigours testing and quality control before they leave our lab.
- Neutrik NP2X connectors
- Unbalanced/Floating cable
- Low Impedance Belden 8412 cable
- 4.7% silver and 1.7% copper soldering - Oyaide SS-47 Audiophile Grade Solder
- Cable shielded with EPDM Insulation, Rayon® Braid
- 20awg Tinned Copper Conductors
- Cable Capacitance 33 pf/ft (Picofarads)
Using the best cable components:
